TipOne® Pipette Tip Starter Systems
Starter systems are a convenient way to get started with TipOne®. Each TipOne starter system includes 10 racks with tips and 20 refill wafers. (2880 tips.)
Price
Each TipOne starter system includes 10 racks with tips and 20 refill wafers. (2880 tips.)
TipOne® Information
Recycling Information for TipOne Products- TipOne pipet tip racks, wafers, lids, and stack components are made from polypropylene code #05 and can be recycled with other #05 products.
- TipOne refill wafers have an outer packaging shell made from either polypropylene #05 (new design introduced in 2015) or PETG (polyethylene terephthalate glycol) code #01 (refills produced before 2015).
- The plastic shrink wrap on refill wafers, stacks, and sterilized products is made from olefin code #07 and can be recycled with "other" recycling products.
- The cardboard box that contains TipOne racks is made from recycled chipboard and can be recycled where chipboard is accepted.
- In selected areas where #5 products are accepted, recycling may be available to you through your local sales representative. To locate a sales representative in your area, please call 1-800-522-8477.
- Place racked tips in the autoclave. If desired, the hinged lid may be propped open using the tab on the front of the lid.
- Autoclave at 121°C (249.8°F) under a pressure of 15 psi for 15 minutes.
- No drying cycle is required. Allow the tips to thoroughly dry at room temperature before use.
Note: Remove the shrink-wrap from stacked tips before autoclaving. Tips in refill packages must be placed inside the hinged racks before autoclaving. Excessive heat and/or prolonged time in the autoclave may cause warping of both the tips and the rack. Filter tips are not autoclavable.